874204 CLS VD 004 1-10V dimmable 350-900mA driver

Note, before using the driver:

Always disconnect the power before connecting the LED fixtures otherwise this will cause serious damage!

Make sure the unused outputs has been shorted with a shortcut connector before connecting the power.

Before use please check the correct dipswitch setting (See sticker on the driver).

For CLS fixtures, the drivers must be set to 700mA. Except for:
Lina High Power (HP) & Diffused (DF), drivers must be set to 500mA.
Focus Micro, drivers must be set to 350mA.

> Demander un devis

> Recherche notre website